TEM200
Twin Head End Milling Machine For PVC Window Processing
Feature:
1. End milling machine TEM200 is used for milling the transom and door frames in UPVC and aluminum profile.
2. Two motors are connected with two shafts directly.
3. Milling several pcs profile in one cycle.
4. Milling cutter up and down adjustment as well as left and right adjustment for various section of profile .
5. Big diameter for milling cutter, high cutting speed.
6. Cutter spindle connected by shaft coupling, cutter working precision does not effect motor spindle running precision .
Main accessory | |
Solenoid Valve | Airtac |
Cylinder | Airtac |
Motor | Anhui Sanyang |
Air Filter Device | Airtac |
Electrical Button and Switcher | Schneider |
AC Contactor and Circuit Breaker | Schneider |
Approach Switcher | Swiss CONTRINEX or Japan Omron |
Parameter | |
Operation Air Pressure | 0.5～0.8(MPa) |
Air Consumption | 10L/min |
Input Voltage | 380V/50Hz or Customer specification |
Main-Shaft Revolution | 2800(r/min) |
Input Power | 4.4kw |
Spindle diameter | 32mm |
Milling cutter diameter | 160-220mm |
Working table feeding travel | 0 - 1050mm |
| Working table size | 530×320mm |
| Motor adjustment travel | 0 - 85mm |
| Tenoning maximum size | 40mm |
Overall Dimension | 1250 *920 * 1650 mm) |
Machine Weight | 450kg |