LDMY100, LDMY60, LDMY75

Gove LDMY Model Industrial Dust Collector

15kW$30,200.00LDMY60
18.5kW$35,650.00LDMY75
22kW$42,150.00LDMY100

Price excludes GST, freight, and installation.

Features

The standard Models generate 8500- 16,400 cubic m/hour extraction volumes at typical pressures. Models delivering up to 240,000 cubic metres per hour are available to meet any demand level!

Upgrade to 3 cubic m bin on LDMY100
+$1980 + GST

Technical Data

	LDMY60	LDMY75	LDMY100
Air volume	10,200 CMH @ 3500pa	15,590 CMH @3000pa	16,400 cmh @3500pa
Fan Power	15 kw	18.5kw	22kw
Inlet diameter	400mm	450mm	500mm
Filter area sq. m	60	75	100
Rows of Pulse Jets	5	5	5
Compressed air	10cfm	10cfm	10cfm

Handle mixed dust loads

Common where fine dust from the CNC, PVC trimmings from the Edgebander and Shavings from solid wood machines are mixed.

With GOVE dirty air enters below the filters into an expanded chamber slowing the airflow and immediately dropping the heavier waste into the bin. The fine dust then travels to the filters in an efficient spiral action

The Extended Hopper height between Inlet and Waste bin prevents the dust already collected in the bin from lifting. The 60 degree hopper walls prevent any waste from bridging.

Together these combine to deliver a system ideally suited to the waste flow from a typical Woodworking shop.

No waste passes through your fan

Inevitably your extraction will pick up small offcuts GOVE is a ‘clean air’ design – where the fan is downstream of the filters so only clean air passes through the fan.
This is significantly quieter and avoids any damage and abrasive wear of the fan blades as waste passes through.

Another important advantage : the inside of the extractor is operating at lower pressure than the outside atmosphere> Dust escape is therefore impossible and your Waste bin is being sucked onto the seal.This is the opposite of a dirty air system and ideal for woodworking applications.

No Pleats to fill and clog

GOVE use smooth wall filter socks not cartridges with pleats which with woodworking are very prone to filling up and blocking airflow.

Inverter control of air volume

With GOVE an Inverter is standard – not an expensive option. This gives you control of the fan speed to match requirements- saving power. It also gives a true ‘soft start’ – easy on your electrics.

Gove also use the latest IE2 high energy efficiency fan motors.

Continuous Filter cleaning

GOVE 5 banks of filters are cleaned in a cycle with timed shots of compressed air that create a shock wave down the filter- cleaning them continually while your extractor operates. This is far superior to Shaker systems that can only clean when the extractor is shut down The continuous cleaning GOVE system maintains filter performance throughout the working day. Woodworking machines have specific airflow volume and pressure requirements and it’s important to meet these continuously and only reverse pulse can achieve this.

Keeping an Eye on your filters

A Magnahelic gauge measures the pressure differential between the clean and dirty air sides of the filters. So you know if a filter has a hole in it or is not clean enough.

It’s then easy to adjust the intensity or interval of the cleaning.

Happy outside

No need to allocate expensive indoor space and forklift access to the Extractor and noise levels inside the factory are reduced. GOVE extractors are happy outside thanks to thick galvanised construction, sloping rain shedding roof panels, stainless steel fittings and outside rated fan/ motors Hot dip galvanised fan housings – another standard GOVE advantage.

Save power

Add a pressure monitor and with the standard inverter you now have a system that automatically recognises any change in demand and adjusts the fan speed to match.Power savings as high as 50% are achieved and your whole Extraction system runs quieter and smoother.

Explosion protection

GOVE include an explosion relief panel that vents any explosion that can be triggered by a spark from a tool. Anti-static filter material is also used to avoid generating a spark.